AeroCool Cronus ARGB E-ATX Mid Tower Case

CronusARGB MID TOWER CASEWide and sturdy chassis design supports E-ATX motherboards for maximum performance and three additional expansion slots for vertical graphics card installation. Designed by ThunderX3, this high-performance mid tower case features an X-shaped RGB LED front panel design to add a stylish flair to your rig.Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion. Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.Comes equipped with one 14cm ARGB fan in the rear of the caseIncludes a GPU bracket that keeps your graphics card stable and prevents it from saggingFull tempered glass side panel to showcase the inside of your rigSix rubber cable grommets and two cable passthrough tubes allows for efficient cable managementSupports liquid cooling in the front, top, and rear of the caseWIDE AND STURDY CHASSIS DESIGNFeaturing a chassis design focused on delivering increased interior space, you now have more freedom and possibilities to customize your PC how you want.With more room for your graphics card, coolers and fans, and even your motherboard, the Cronus will allow you to fully maximize the performance of your PC build.DESIGNED FOR OPTIMAL GRAPHICS CARD INSTALLATIONBuilt with three additional vertical expansion slots, allowing you to install your graphics card at a vertical position.Includes a GPU bracket that keeps your graphics card stable and secure while preventing it from sagging.ADDRESSABLE RGB COMPATIBLEAccess 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header).Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.6-PORT RGB CONTROL HUBFeatures a 6-port hub with PWM control functions and allows you to connect up to six 6-Pin AeroCool Addressable RGB fans and up to two 3-Pin Addressable RGB accessories with +5V ARGB connector.Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).PWM COMPATIBILITYPlease check if the 4-Pin fan header on your motherboard is PWM compatible.• PWM based – PWM compatible• Voltage based – not PWM compatibleONE 14CM ADDRESSABLE RGB FAN INCLUDEDComes equipped with one 14cm Addressable RGB fan in the rear of the case to add a stylish flair to your rig.ARGB fan can be controlled using LED control button or ARGB motherboard.STYLISH RGB FRONT PANEL DESIGNFeaturing a X-shaped RGB LED front panel design, this case delivers a dynamic yet powerful look and feel to your gaming setup.Bring your case to life with preset lighting modes that can be readily controlled via LED control button.E-ATX MOTHERBOARD SUPPORTWith support for E-ATX motherboards, this mid tower case is built for maximum performance.BUILT FOR HIGH PERFORMANCESupports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboardsSupports CPU coolers up to 180mmSupports high-end graphics cards up to 387mm (without front radiator)EFFICIENT CABLE MANAGEMENTComes equipped with six rubber cable grommets and two cable passthrough tubes (includes two additional tubes) on the motherboard tray to keep your cables neat, tidy, and secure.FULL TEMPERED GLASS SIDE PANELComes equipped with a full tempered glass side panel to showcase the inside of your rig while putting your components on full display.IMPROVED AIR VENTILATIONAir vents in the front panel increase air flow and ventilation to keep your system cool.AIR COOLINGSupports air cooling in the front, top and rear of the case to enhance cooling performanceFront: 120mm x 3 or 140mm x 2 (Max.)Top: 120mm x 2 or 140mm x 2 (Max.)Rear: 120mm x 1 or 140mm x 1 (140mm ARGB fan x 1 included)LIQUID COOLINGSupports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.Front: 120/240mm Radiator (Optional)Top: 120/240mm Radiator (Optional)Rear: 120mm Radiator (Optional)CONVENIENT ACCESS TO YOUR MEDIAQuick and easy access to LED control button, 2 x USB 3.0, HD audio and mic ports, and power & reset button.STORAGE CAPABILITSupports up to 3 x 3.5” HDDs (2 x 3.5” and 1 x 3.5”/2.5″) and 5 x 2.5” SSDs (4 x 2.5” and 1 x 2.5”/3.5”).EASY MAINTENANCEComes equipped with removable dust filters for convenient cleaning and maintenance.SpecificationsModelCronus-G-BK-v1Case TypeMid TowerColorBlackBody MaterialSPCCFront Panel MaterialABS + SteelSteel Thickness0.7mmMotherboardsE-ATX/ATX/micro ATX/mini-ITXCase Dimensions (Internal)230 x 470 x 390mm (W x H x D)Case Dimensions (Overall)230 x 502 x 468mm (W x H x D)3.5” Drive Bays3 Max. (2 x 3.5” and 1 x 3.5”/2.5″)2.5” Drive Bays5 Max. (4 x 2.5” and 1 x 2.5”/3.5”)Expansion Slots7 + 3GPU ClearanceSupports GPU up to 387mm (without front radiator)CPU Cooler ClearanceSupports CPU cooler up to 180mmAir CoolingFront: 120mm x 3 or 140mm x 2 (Max.)Top: 120mm x 2 or 140mm x 2 (Max.)Rear: 120mm x 1 or 140mm x 1 (140mm ARGB fan x 1 included)Liquid CoolingFront: 120/240mm Radiator (Optional)Top: 120/240mm Radiator (Optional)Rear: 120mm Radiator (Optional)I/O PortsUSB3.0 x 2 | HD Audio & Mic.Internal Cable Management Depth26.55mmPower SupplyATX PSU (Including cables, up to 223mm) (Optional)Warranty1 YearNote*** Features, Price, Specifications are subject to change without notice.