Thermaltake Commander C33 TG ARGB ATX Mid Tower Case

Features:Two Built-in 200mm 5V ARGB Front FansExcellent Cooling Capability with 2-Way Radiator Mounting up to 360mmBuilt-in ARGB Switch Board for Different Lighting ModesGaming Design, Mesh Front PanelRiser GPU Support BracketBuilt-in Power Cover4mm Tempered Glass Side PanelSuperior Hardware SupportSupports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O PortI/O Port Supports Dual USB 3.0Dual Built-in 200mm 5V ARGB Case FansPreinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.One Click, Switching The ModeThe 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.Wave Mode – [Mode 1] RGB wave flows across the entire fan. Color mode cannot be changed while on wave mode.Tt LCS CertifiedTt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Sync with Motherboard RGB SoftwareDesigned to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websitesAngular, Mesh Front PanelExpanded from the gaming spirit of the classic Overseer RX-I chassis, the special design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Riser GPU Support BracketSpecially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Built-in PSU CoverEquipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Seamless Tempered Glass PanelThe tempered glass side panel of the Commander C33 TG ARGB is built to be more durable and scratch resistant than older acrylic panels.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Superior Hardware SupportThe Commander C33 TG ARGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Excellent Cooling CapabilityOptimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Handy I/O PortsDual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.The image is for reference only.Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.Specifications:ModelCommander C33 TG ARGBP/NCA-1N4-00M1WN-00TypeMiddle towerDimension (H x W x D)462 x 233 x 518 mm (18.2 x 9.2 x 20.4 inch)Side Panel4mm Tempered Glass x1ColorExterior & Interior : BlackMaterialSPCCCooling SystemRear (exhaust): 120 x 120 x 25 mm fan(1000rpm, 16 dBA)Front (intake): 200 x 200 x 30 mm ARGB fan x2(800rpm, 29.2 dBA)Drive Bays-Accessible-Hidden-3 x 3.5“ or 2.5” (HDD Bracket); 2 x 2.5” (HDD Bracket)Expansion Slots7 + 2Motherboards6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)I/O PortUSB 3.0 x 2, HD Audio x 1, RGB Switch x 1PSUStandard PS2 PSU (optional)Fan SupportFront: 3 x 120mm, 2 x 140mm, 2 x 200mmTop: 2 x 120mm, 2 x 140mmRear: 1 x 120mmRadiator SupportFront: 1 x 360mm, 1 x 280mmTop: 1 x 240mm, 1 x 280mmRear: 1 x 120mmClearanceCPU cooler height limitation: 180mmPSU length limitation: 200mmVGA length limitation: 310mm(With reservoir) 410mm(Without reservoir)VGA width limitation(Vertically): 45mmVGA height limitation: 110mmRAM height limitation: 35mm (With 140mm radiator series) 50mm (With 120mm radiator series)Warranty3 YearsNoteFeatures, Price, Specifications are subject to change without notice. Images used for representation purpose only